|
|
|
C．兩隔板端面對旋渦工作輪有歪斜。 Drsitotion in eudsurfaces
of two diaphragm plates to swirl wheel． |
c．應拆開泵以涂色檢查的方法，再正確進行進安裝。 Disassemble pump，
inspect with colouring method and veassemble it correctly． |
|
(4) |
密封裝置漏水 Leakage of Seal ing gland |
a．動環對靜環歪斜。 Obliguity of dynamic ring
to stariC ring． b．水中含有大量磨損物將密封面磨損。 There is a gvegt deal 0f
abrasive matter in water which Wear the Sealng surface |
a．拆開泵用涂色方法檢查消 除歪斜。 Disassemble pump，
inspect with colouring method
and eliminate obliguity． b．增加濾網，把密封面研磨好。 Adp some filter gauzes and
grind the sealing surface． |
|
c．密封彈簧松馳。 Loosing in sealng spring． |
e．更換新彈簧。 Replace it with a new one． |
||
|
d．○形環箍死在軸上。 clamp-down of o-ring on
the shaft． |
d．應調整在彈簧作用下，能沿軸自由移動。 Readjust o-ring so that it
can remvoe along the.shaft smoohly
under the action of spring． |